Contactless 13.56 mhz RFID Card Reader/Write Module Embedded Type Without Bezel
Overview:
RCR-3300 is a high-performance embedded RFID card reader/writer module, read and write Mifare1 (S50 and S70), ISO 14443A/ B, ISO 15693 series card, with one SAM slot, RS232/USB/TTL interface for optional. It is 13.56 mhz RFID card reader/write module, which can be widely applied in the industries of attendance system, access control, public transportation, Mail & package management system and any other terminal systems.
High Light : 80mm Contactless RFID Reader Module, Rs232 Contactless RFID Reader Module.
Specification:
| Voltage | +5VDC (± 5%) |
| Current | <120mA |
| Card type | Read and Write Mifare1 (S50, S70) ,ISO14443A/B,ISO15693,Smart card |
| Distance | Type A: 0~8cm,type B: 0~5cm,ISO15693: 0~10cm |
| Interface | RS232/RS485, TTL, USB HID |
| Baud rate | 9600(default)~115200 BPS |
| Temperature | Operating: 0°C ~ + 60°C Storage: -20°C ~ + 60°C |
| Humidity | Operating: 5% ~ 95% RH Storage: 20 %~ 90% RH |
| Dimension | 100mm ( L ) x 50mm ( W ) x 10mm ( H ) |
Features:
1) High performance embedded type
2) Unique card searching function
3) Stable & Reliable
4) Compact, small, easy to use,
5) Low power consumption
6) Widely application
Applications:
*Mail & package management system
*Parking meter system
*Hand held terminal
*Access control system
*Time attendance system
Interface:
1. Main interface J1(6*2.0mm)
Used for RS232 and USB communication, Pin definition description:
Pin1 ---- GND
Pin2 ---- VCC (DC+5V)
Pin3 ---- GND
Pin4 ---- RS232.RX or RS485.B or USB.D+
Pin5 ---- RS232.TX or RS485.A or USB.D-
Pin6 ---- GND
2. Extended interface J2(8*2.0mm)
Used for TTL. Pin definition description:
Pin1 ---- VCC (DC+5V)
Pin2 ---- GND
Pin3 ---- TTL.RXD
Pin4 ---- TTL.TXD
Pin5 ---- GPIO0
Pin6 ---- GPIO1
Pin7 ---- Wiegand.D0
Pin8 ---- Wiegand.D1
Dimension:
Caution:
* Swipe card no response: Whether the interface is inserted properly; Whether the RF card is the corresponding RFID card class; Whether the radio frequency card is broken; Whether another RF card is in the card reading range.
* Data forwarding error: Whether the mouse is operated when the card is swiped; Whether the card is read in the environment of strong electromagnetic interference; Whether the communication cable between the card reader and the computer is too long; Whether in critical state read card.
Tips:
This RFID card reader is the Contactless IC card, composed of IC chip and induction antenna, packaged in a standard PVC card, chip and antenna without any exposed part. It successfully combines RFID technology with IC card technology, ending the passive (no power in the card) and contactless problems. The card is placed close to the reader surface at a certain distance (usually 5 to 10mm), and the data is read and written through the transmission of radio waves. The contactless IC card and the card reader are read and written by radio waves, and the communication frequency between them is 13.56MHZ.
Product Tags:
|
|
Contactless 13.56 Mhz RFID Card Reader / Write Module Embedded Type Without Bezel Images
|
